PTD.NET Mail Settings For Outlook


ptd.net outlook settings

You will find the process of setting up a PTD.NET email account on a personal system/device or any email client platform to be really easy after going through this detailed article. Everybody today knows how to use basic email services such as sending and receiving emails, but the real struggle begins when the users actually start to configure their PTD.NET email account and check for the appropriate PTD.NET mail server settings over the Internet. Worry not! we are here for your escape from this sort of situation. In the below post, you will find all the correct PTD.NET mail server settings - IMAP, POP and SMTP server settings to configure your PTD.NET MAIL account successfully.

Other than the general PTD.NET mail server settings that will work for any device or email client platform, we have also covered below the PTD.NET Outlook settings as many users have been searching for the same. Just follow all the simple steps as mentioned below and get going. You will not be able to configure your PTD.NET mail account without applying the appropriate server settings as defined in this article. Therefore, do not waste time and start with the application of required server settings.

PTD.NET IMAP Settings (Incoming Mail Server)

For all the devices and email client platforms, below are the general PTD.NET IMAP settings needed to enable the incoming email services for your account. You must carefully enter and apply all the IMAP server settings as given below because the incoming mail services will not be activated without the same.

PTD.NET Incoming Email Server account typeIMAP
PTD.NET Incoming Email Server user nameYour full PTD.NET email address
PTD.NET Incoming Email Server passwordYour PTD.NET email password
PTD.NET Incoming Email Server hostnamepromail.ptd.net
PTD.NET Incoming Email Server Port143
PTD.NET Incoming Email Server TLS/SSL requiredYES
Authentication requiredYES (Email account Username and Password) 

Once all the settings of the PTD.NET IMAP server are applied as above, emails will be received in your inbox without any problems.

PTD.NET POP3 Settings (Incoming Mail Server)

You can use the PTD.NET POP3 Settings if you want to configure your PTD.NET email account as a POP account on any device or email client platform. The following are the settings for the PTD.NET POP3 server.

PTD.NET Incoming Email Server account typePOP
PTD.NET Incoming Email Server user nameYour full PTD.NET email address
PTD.NET Incoming Email Server passwordYour PTD.NET email password
PTD.NET Incoming Email Server hostname promail.ptd.net
PTD.NET Incoming Email Server Port995
PTD.NET Incoming Email Server TLS/SSL requiredYES
Authentication requiredYES (Email account Username and Password) 

The above mail server settings indicate that the POP server will be used for your PTD.NET account incoming email services. After all the above PTD.NET POP3 settings are applied, you will start receiving emails at your end. 

PTD.NET SMTP Settings (Outgoing Mail Server)

In order to allow outgoing mail services of your PTD.NET email account, you must use the correct PTD.NET SMTP settings for your device or email client platform, as stated in the table below.

PTD.NET outgoing Email Server account typeSMTP
PTD.NET outgoing Email Server user nameYour full PTD.NET email address
PTD.NET outgoing Email Server passwordYour PTD.NET email password
PTD.NET outgoing Email Server hostnamepromail.ptd.net
PTD.NET outgoing Email Server Port587
PTD.NET outgoing Email Server TLS/SSL requiredYES
Authentication requiredYES (Email account Username and Password) 

After applying the SMTP server settings as mentioned above, you must test for the activation of the outgoing mail services of your account. Send an email to someone from your contacts and check whether the email is sent or not. If the emails are being sent successfully, then nothing is to be stressed about.

PTD.NET Outlook Settings (Automatic Setup)

Looking for the correct PTD.NET Outlook settings to set up your PTD.NET email account successfully? Then your search ends right here. Read below and know the easiest way to set up your PTD.NET account as per the correct PTD.NET Outlook settings.

Step 1- Firstly, you need to launch the Outlook program on your system.

Step 2- Now make a selection for the “Tools” option that is available in the top menu bar.

Step 3- Select the option of “Account settings”. 

Step 4- Under the Account settings page, go to the email tab and then click on “New”.

Step 5- Choose the “Microsoft Exchange, IMAP, POP3 or HTTP” option and afterward make a click on the “Next” button.

Step 6- Now you are required to input all the necessary details such as your name, your PTD.NET email address and password and then simply make a click on the “Next” button.

Step 7- The Outlook program will now set up your PTD.NET mail account automatically according to the correct IMAP server settings.

Step 8- In the end, just click on the “Finish” button and afterward “Close”.

So, this was a stepwise approach used for setting up a PTD.NET email account on Outlook through automatic settings. You should be able to send/receive emails without problems using the IMAP server for the incoming mails.

PTD.NET Outlook Settings (Manual Setup)

You can also configure your PTD.NET email account on your Outlook by following the manual setup process. In addition to that, you need to enter and apply the required PTD.NET Outlook settings to proceed with the process of setting up the PTD.NET email account manually. These settings are applicable to all available Outlook versions. You just need to follow the steps as given below.

Step 1- Firstly, you must launch the Outlook program on your system.

Step 2- Now click on the “Tools” option that is located at the top menu bar.

Step 3- Select the option of “Accounts Settings”.

Step 4- On the page of Accounts Settings, go to the email tab and then click on “New”.

Step 5- Choose the “Microsoft Exchange, IMAP, POP3 or HTTP” option and then make a click on the “Next” button.

Step 6- Select the checkbox that says “Manually configure server settings or additional server types” and then hit the “Next” button.

Step 7- Choose the option of “Internet email” and then make a click on the “Next” button.

Step 8- Now you are required to fill in all the necessary details/information (Select IMAP or POP as per your requirements)  and then click on “More Settings”.

Step 9- Go to the outgoing server tab and ensure that the checkboxes that read as “My outgoing server (SMTP)  requires authentication” and “Use same settings as my incoming mail server” are ticked.

Step 10- Now go to the Advanced tab and ensure that the PTD.NET mail settings are as per given below depending on the IMAP or POP server selection. 

PTD.NET POP Settings

Incoming port 110
Outgoing port 587
Secure port 995
Security TypeSSL/TLS (Accept all certificates)
Insecure port 110
Security TypeNone (Accept all certificates)
Tick the checkbox “This server requires an encrypted connection (SSL)”
Set the option reading as “Use the following type of encrypted connection” to None

PTD.NET IMAP Settings

Incoming port 143
Outgoing port 587
Secure port 993
Security Port SSL/TLS (Accept all certificates )
Insecure port 143
Security Port None (Accept all certificates)
Tick the checkbox that says “This server requires an encrypted connection (SSL)”
Set the option reading as “Use the following type of encrypted connection”
  • Tick the checkbox that says “This service requires a secure connection (SSL)” for both the incoming and outgoing mails if you choose to go with the Secure SSL/TLS settings.

PTD.NET SMTP Settings

Outgoing secure (SMTP) port 465
Security TypeSSL/TLS (Accept all certificates)
Outgoing secure (SMTP roaming server) port 587
Security Type SSL/TLS (Accept all certificates)
Outgoing (SMTP) port 25
Security Type None (Accept all certificates)
Outgoing insecure (SMTP roaming server) port 587
Security Type None (accept all certificates)

Step 11- Click on the OK button to save and apply the aforementioned server settings.

Step 12- In the end, you need to click on “Next” and then “Finish”.

The above defined is the correct procedure along with the step-by-step manual server settings, which will help you configure your PTD.NET email account on Outlook. With all the Outlook versions you may use on your system, the settings are almost the same. You simply need to use the settings as given above for the manual setup of your account and enjoy the PTD.NET's hassle-free mail services.

We hope that you are now aware of the correct PTD.NET mail server settings for the configuration of your PTD.NET email account on any device or email client platform and that you have no question or query concerning the PTD.NET mail settings after going through this detailed post. 

Are you still facing problems with the mail server settings of your PTD.NET email account? Just report the problem or query to us by using the live chat service and be assured of the perfect solution. Our team has the best answers/solutions to all the questions and issues relevant to any email server settings. Our specialized technical team is available 24*7.

We have also provided some further guides that will help those who need to set up their Rocketmail email settings or STX.RR.COM email settings as per the correct server settings on various email client platforms and devices.

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
Talk To PTD.NET Mail Expert.phone+1-866-439-1064